Switching between Branches
The simplest way to switch between branches (or more precisely, between the latest commits within branches) is to double-click on a branch in the Branches view and confirm the Switch Branch dialog that comes up. The Branches view can be found both on the project window and on the Log window .
If you switch to a remote branch, you can optionally create a new local branch (recommended) and set up branch tracking.
If you switch to a local branch that tracks a remote branch, and the latter is ahead of the local branch by a couple of commits, you can decide whether you just want to just switch to the latest commit of the local branch, or to switch and let SmartGit do a fast-forward merge to the latest commit of the remote branch. For further information on merging, see Merge.
If you have local changes in your working tree, the Switch might fail. In this case, SmartGit offers you to stash away the local changes before executing the actual Switch command and re-apply the changes from the stash after executing the command. For further information on stashes, see Stashes.
A more general procedure than branch switching is to check out arbitrary commits, which is explained in Checking Out Commits.
Checking Out Commits
In SmartGit, there are two ways to switch the working tree to a certain commit:
- Project window On the project window, invoke Branch|Check Out from the menu. This will open a dialog containing a Log view, where you can select the commit to switch to.
- Log window On the Log window , select the commit to switch to and then select Check Out from its context menu.
If you select a commit where local branches point to, you will have the option to switch to these branches. If you select a commit where remote branches without corresponding local branches point to, you will have the option to create a corresponding local branch.
Similar to Switch, Check Out will optionally stash away local changes, if necessary.
Adding, Renaming and Deleting Branches and Tags
You can add, rename and delete branches and tags both from the project window and from the Log window.
The Branches view on the project window has various context menu entries for adding, renaming and deleting selected branches and tags. These commands can also be invoked via the entries in the Branch menu.
On the Log window, you can add a branch or tag on a commit by selecting the commit in the Log graph and invoking Add Branch or Add Tag in the commit's context menu. Similarly, you can delete a branch or tag by selecting the commit to which the branch or tag pointer is attached and invoking Delete in the commit's context menu.
Via the context menu of the Log window's Branches view, you can add and delete branches and tags as well. In addition to that, the Branches view also allows you to rename branches.
The Merge command allows you to merge changes from another branch into the current branch. In addition to the 'normal' merge operation, there are two variants called 'fast-forward merge ' and 'squash merge'. The differences are as follows:
In case of a normal merge, a merge commit with at least two parent commits (i.e.,
the last from the current branch and the last from the merged branch) is created.
See the following figure, where
> indicates where the HEAD is pointing
If the current branch is completely included in the branch to be merged with (i.e. the latter is simply a couple of commits ahead), then no extra merge commits is created. Instead, the branch pointer of the current branch is moved forward to match the branch pointer of the other branch, as shown below:
In SmartGit, there are several places from which you can initiate a merge:
- Menu and toolbar On the project window, select Branch|Merge to open the Merge dialog, where you can select the branch to be merged into the current branch. Depending on your toolbar settings, you can also open this dialog via the Merge button on the toolbar.
- Branches view In the Branches view (available both on the project window and the Log window), you can right-click on a branch and select Merge to merge the selected branch into the current branch.
- Log Graph On the Log graph of the Log window, you can perform a merge by right-clicking on the head commit of the branch to be merged with and selecting Merge from the context-menu.
Regardless of where you invoked the Merge command, you will be given the choice between Create Merge-Commit and Merge to Working Tree, and optionally also Fast-Forward if a fast-forward merge is possible.
If you choose Create Merge-Commit, SmartGit will perform the merge and create a merge commit, assuming there are no merge conflicts. If there are merge conflicts, or if you choose Merge to Working Tree, SmartGit will perform the merge, but leave the working tree in a merging state, so that you can manually resolve merge conflicts and review the changes to be made. See Resolving Conflicts for further information on how to deal with merge conflicts.
The squash merge works like a normal merge, except that it discards the information about where the changes came from. Hence it only allows you to create normal commits. The squash merge is useful for merging changes from local (feature) branches where you don't want all of your feature branch commits to be pushed into the remote repository.
On the Commit dialog, you can choose between a normal merge (merge commit) and a squash merge (simple commit). Thus, to perform a squash merge you have to choose Merge to Working Tree when initiating the merge, since otherwise you won't see the Commit dialog.
Merge versus Rebase
A Git-specific alternative to merging is rebasing (see Rebase), which can be used to keep the history linear. For example, if a user has made local commits and performs a pull with merge, a merge commit with two parent commits - the user's last commit and the last commit from the tracked branch - is created. When using rebase instead of merge, Git applies the local commits on top of the commits from the tracked branch, thus avoiding a merge commit.
The Cherry-Pick command allows you to 'apply' certain commits from another branch to the current branch.
In SmartGit, there are several places from which you can initiate a cherry-pick:
- Menu and toolbar On the project window, select Branch|Cherry-Pick to open the Cherry-Pick dialog, where you can select one or more commits to cherry-pick. Depending on your toolbar settings, you can also open this dialog via the Cherry-Pick button on the toolbar.
- Log Graph On the Log graph of the Log window, you can perform a cherry-pick by right-clicking on one or more commits and selecting Cherry-Pick from the context-menu.
The Revert command allows you to 'undo' certain commits (from whatever branch) in the current branch.
In SmartGit, there are several places from which you can initiate a Revert:
- Menu and toolbar On the project window, select Branch|Revert to open the Revert dialog, where you can select one or more commits to revert. Depending on your toolbar settings, you can also open this dialog via the Revert button on the toolbar.
- Log Graph On the Log graph of the Log window, you can perform a revert by right-clicking on one or more commits and selecting Revert from the context-menu.
The Rebase command allows you to apply commits from one branch to another. Rebase can be viewed as more powerful version of Cherry-Pick, which is optimized to apply multiple commits from one branch to another. In SmartGit, a distinction is made between Rebase HEAD to and Rebase to HEAD:
Rebase HEAD to rebases ("moves") the commits below the HEAD to the selected commit. The HEAD will be moved to the new fork.
Rebase to HEAD duplicates commits from a separate branch to the HEAD (similar to what Cherry-Pick does). The HEAD moves forward on its fork.
To Rebase Onto you may use the Log window.
Consider following example where the
quickfix2 branch should not start
quickfix1 branch, but rather on the
To achieve this, just drag the
q2a commit onto the
commit and you will get the desired result:
In SmartGit, there are several places from which you can initiate a rebase:
- Menu and toolbar On the project window, select Branch|Rebase HEAD to or Branch|Rebase to HEAD to open the Rebase dialog, where you can select the branch to rebase the HEAD onto, or the branch to rebase onto the HEAD, respectively. Depending on your toolbar settings, you can also open this dialog via the buttons Rebase HEAD to and Rebase to HEAD on the toolbar.
- Branches view In the Branches view, you can right-click on a branch and select Rebase HEAD to to rebase your current HEAD onto the selected branch.
- Log Graph On the Log graph of the Log window, you can perform a rebase by right-clicking on a commit and selecting Rebase HEAD to or Rebase to HEAD from the context-menu.
- Log Graph In the Log graph of the Log window, you can drag and drop commits or refs and then select to rebase in the occurring dialog after the drop.
Just like a merge, a rebase may fail due to merge conflicts. If that happens, SmartGit will leave the working tree in rebasing state, allowing you to either manually resolve the conflicts or to Abort the rebase. See Resolving Conflicts for further information.
When a merge, a cherry-pick or a rebase fails due to conflicting changes, SmartGit stops the operation and leaves the working tree in a conflicted state, so that you can either abort the operation, or resolve the conflicts and continue with the operation. This section explains how you can do that with SmartGit. Generally, the following options are available:
- Resolve dialog If you select a file containing conflicts and then invoke Local|Resolve in the menu of SmartGit's project window, the Resolve dialog will come up, where you can set the file's contents to either of the two conflicting versions, i.e. `Ours' or `Theirs'. Optionally, you may also choose not to stage the resetting of the file contents, meaning that the conflict marker on that file won't be removed.
- Conflict Solver Selecting a file containing conflicts and invoking Query|Conflict Solver will open the Conflict Solver, a three-way diff between the two conflicting versions (left and right editor) and a third version (center editor) that contains the conflicting hunks from both sides, along with conflict markers. You can directly edit the text in the center editor, and you can move changes from the left and right side into the center by clicking on the arrow and `x' buttons between the editors.
- Discard command To abort the merge, cherry-pick or rebase, select the repository in the Repositories view and invoke Local|Discard.
Lastly, if all conflicts have been resolved, you can continue with the merge, cherry-pick or rebase by selecting the repository in the Repositories view and invoking Local|Commit.